Rivets's latest activity

Not a separate part, will need to replace the carb, or find a used carb at a repair shop to scavenge the choke shaft.

This manual will tell you how to hook up, test, and adjust the governor...

First, check to see if you may have installed the coil upside down. Second, set the air gap at .010”. Check for spark with kill wire...

Look at page 34 of this service manual. https://resources.kohler.com/power/kohler/enginesUS/pdf/16_690_01_EN.pdf

Need to adjust the throttle control to fully open the throttle plate, where it attaches to the engine.

Need to adjust the throttle control to fully open the throttle plate, where it attaches to the engine.

You’ll probably going to have to check under the unit, I’m thinking bad pulley on the drive tensioner arm. Post unit model and serial...

Kohler part number for intake valve seal is 1403208S. Here is a parts diagram and service manual for your engine...

Boy, has this thread taken a left turn, OP said he got his answer in post #7. Don’t know how we got on charging or jump starting a unit.

Maybe this manual will help you out. https://www.toro.com/getpub/22446

Maybe this manual will help you out. https://www.toro.com/getpub/22446

I have found that if the battery spins the starter, but no start, and pull start works fine it is time to rebuild the carb with a new...

This manual will probably help you solve the problem. https://www.toro.com/getpub/22446

On this Memorial Day I would like to say a big THANK YOU to all who served this country to make it safe for the rest of us to live in...

Time to replace the drive belt and readjust the drive cable.