Rick O's latest activity

  • R
    Rick O replied to the thread Briggs 28n707.
    Chinese
  • R
    Rick O replied to the thread Briggs 28n707.
    No, I did remove it to clean and make sure rust was not interfering with the ground. Would a coil act up on slower RPM? I also pulled...
  • R
    Rick O replied to the thread Briggs 28n707.
    done all of that. It seems to pop on the exhaust side and fart back through the carb. I may try a coil and plug but I am now wondering...
  • R
    Rick O replied to the thread Briggs 28n707.
    It is a 38" riding mower. I pulled the head again and lapped the valves today and they were ok as I suspected. I also looked at the...
  • R
    Rick O replied to the thread Briggs 28n707.
    new carb and no dirt or restriction as I replaced all lines from the tank and filter with fuel flowing freely. It appears to hiccup or...
  • R
    Rick O posted the thread Briggs 28n707 in Briggs & Stratton.
    Does the compression release ever break or malfunction where it is always engaged so as to affect the low speed and need full choke to...
  • R
    I have another one coming. You can't beat Temu for giving you a refund when the thing doesn't work so you can order another for $10...
  • R
    The intake to head mounting gaskets or O-rings are possibly leaking. What appear to be a plug on the bottom of the intake is not...
  • R
    Rick O replied to the thread One coil or both???.
    Clean all the rust from the coil and engine mounting points and then see if you need none.
  • R
    I bought this thing full of gas in the crankcase. Pulled the tank cleaned and replaced all hoses, filter with a shut off valve. Would...
Top