rhkraft's latest activity

I believe most carb problems are caused by storing these engines outside where moisture gets in the fuel tank and carb. Unleaded 87...

i have had this happen. A little bump on a fly weight next to the intake cam hits the lifter on the way up and releases the compression...

Before doing anything more remove the key and bolt. Then take some medium/fine abrasive paper and polish the crankshaft until it is...

You might try replacing the fuel tank filter. My Stihl was hard starting and once it was running it would fail when I tried to...

One speed unless the grass is thick. Heavy grass and reduce the speed as the electric may not have the power to keep up.

Remember, AI is only what the program writer was thinking. If his experience is limited, the AI won't be better. From my experience...

I believe the shaking is the result of unbalanced blades. See if they are worn. They make a balancer, enter "lawn mower blade balancer"...

Cadet, Husqvarna, Craftsman are all MTDs. the mower decks are identical. I had a craftsman and blew an engine. Bought a Husqvarna and my...

Increase the size of the hole. Then watch for cracking. Looking at this, I don't see the stress for cracking. A hole saw might work!

Clean the battery posts first. I am thinking your jump is making a better connection than the battery posts.

I once sold a used 6 hp string mower to a woman. I told her to check the oil and add whatever every time she fueled it. It came back...

I am with the upside-down blade or a loose blade

so they can sell you more wheels.

In the old cars and tractors with point ignitions the capacitor was in the distributor with the points. The coil was separate. We used...

The crack or pin hole in the supply fuel line seems noteworthy. Fill the tank and see if it runs OK. If the problem only occurs after...