revtim's latest activity

The blade bolts or nuts are right hand thread (conventional). Use a short board to pin between the blade and deck when you go to break...

TO ALL: Well... it turned out that it was one of the coils, the one to the inside facing the seat that was bad. Thanks to the youtube...

Hi StarTech, Have you ever used Royal Purple 10W-40? That stuff is awesome in air cooled commercial mowers in hot climates. I'm in...

Checked after cleaning the pan and it isthe governor shaft seal.. so I can address that.. thanks for the tip.. and the video someone...

Well.. i replaced the plugs, the air filter and the fuel filter and added new gas as well... it ran much better at first, both cylinders...

True that. Oil is cheap though. Keep her on the full mark prior to every mow.

Boy.. did I get that wrong. I thought, being a municipality where they have mechanics on staff they would service them more regularly...

All kawasaki engines at around 800 hours needs the govenor shaft seal replaced. There are vids on the tube.

Toro 74923 used a Kawasaki FX751-AS07 engine in all serial numbers. Never assume anything...I have seen low hour engines to fail...

Thanks for all the input... I should mention that the pan beneath the engine has oil on it...evidence of a leak but don't know from...

Recently purchased a 2010 Toro 74923 Z Master Commercial Zero Turn Mower with 1450 hours on it from a municipality. Cut grass twice so...