Recent content by OEFLep

StarTech, good advice. When I tried to move under power the notch for the brakes was not engaged at first but then dropped on. The throw lever was disengaged as the cotter pin disappeared. Hooked that back up and I'm mowing, Wee Haa. So glad it was not the Hydro. Thanks a bunch.

I have an older Gravely ZT 2348 XL zero turn and only the right side wheel will go. I had released the hydros to push the machine and afterwards closed the release bolts down, backed them off a quarter turn. Start her up, and at first I could go forward but then the left handle got really stiff...

I appreciate the encouragement and I have to re-learn things sometime in my old age. Appreciate all the help too.

Time to throw myself under the bus. There is indeed a torx set screw inside the long nut. I only looked at one end after I took the rocker assembly off. There is no sense in being stupid if I don't show it, how would anyone know? (Dad quote)

Thanks, Rivets and VegetiveSteam. There is only one elongated nut but I'll be checking both out.

So I have no need to adjust these until I started get the hard to crank issue. Knowing this is likely the valve adjustment, I got in there and there is no lock/jam nut. How do you adjust these and then not have it back itself off?

I think the brake rod adjustment is the answer. The right side clears the steering arm slot with the brake released but not the left side. I'll be working that out tomorrow. Really appreciate the link too.

Great, I'll check that out. Thank you.

Sooo.... I have an older Cub Z-Wing, which is the Tank with a deck that folds up on the sides. I had released the Hydros to push it and then this season I went to mow the right side lever moves forward and back, but the left is stuck in the middle. I noticed there is slot on the arm mounts that...