nbpt100's latest activity

They must have wiring diagrams. They just do not want to share them. I did find some on the internet for older machines like the...

Thanks Star Tech. I got to keep trying. On the hood it says 1900. If that Helps anyone.

I am looking for a wiring diagram for a Craftman 247.203791 riding lawn tractor. It has a 22hp Kohler with a 46" deck. I went on the...

Teflon tape not required. It will seal well enough with just being installed and tightened with the air filter base installed

First thing I always check on Tecumseh engines which have a hard starting problem is float level. Float seat will swell, lowering the...

Yes! I put my finger over that bolt hole and the primer pushed gas through the main jet into the throat. YES. thank you so much...

Two things which come to mind when I see that carb. First, more that once I’ve seen the float assist spring not installed properly...

Just as a side note. On some of the Tecumseh engines one of the air cleaner base mounting bolts goes into the primer cavity and if the...

The carb is 640025. It is a fixed jet carb with the plastic emulsion tube. I am usually good with cleaning carbs with wires and...

I forgot to say I did change the seat. I also adjusted the float height to 11/64th as they explain in the shop manual. The fuel should...

I have a 6hp OHV Tecumseh that is hard starting. I adjusted the valves to .004 each. New spark plug, cleaned the carb and changed the...

This service manual may help you out. You have a Tecumseh model OHH60...

This engine is on a Craftsman Roto tiller. I hope this is ok not being a Lawn mower???? It was given to me in a few pieces...

They make nice stuff. The problem is that there is too much nice stuff out there. Lots of options for very nice tools. They are just...

I completely agree, that was the point I intended. Good clarification