MParr's latest activity

After 18 replies, 3 different starter replacement attempts and jumping with a vehicle battery, the obvious that has been explained is...

I understand your fustration, but go out into the country sometime then they are mowing side ditches with the rotary cutters and half...

That is about the correct location for rod breakage when the rod seizes to the crank from lack of lubrication failure. And the bolts...

Hello Mjhover, Sounds like a plan. Make sure you have a way to transport it in the future if needed. Pickup and delivery are never...

I think I’m going to go with the Hustler raptor xd 60in. And going to get it from a local hustler dealer

We're all knocking on wood daily here but it does seem like things are patched up. I've been watching the logs and they haven't been...

Red and tacky is all I use and buy it by the case. If it were so bad (slomo) how do they sell so much of it? Ha ha 2x

I have the Valvoline Extreme Red in a new dedicated gun just for the spindles. This is the third set of bearings in less than 500 hours...

https://www.valvolineglobal.com/en/cerulean-grease/ https://www.valvolineglobal.com/en/extreme-red-grease/

Ebay turns up with good used rider engines pretty often. Most people trash their mower decks long before the engine breaks down...

Look at the Raptor XD model. It's transaxles are a step up from the ZT2200 found on the XL model. As @Auto Doc's said, buy from a...

https://www.smallenginewarehouse.com/44t977-0043

Did the same on the last filter order. The white 75 micron jobs for tight spaces (push mowers). Run all day on gravity fed engines...

Apologies for the unacceptably long time without getting back to you or fixing it. We've implemented a number of fixes today that seems...

I have the same MS250 (around 12 years old) and the same starting problem. Sometimes it starts right up and other times it floods out...