MParr's latest activity

The attached photo will show the broken attachment point of the choke linkage.

Tell us the model and serial numbers of your mower. Tell us what your cutting height is. Tell us your type of grass.

It's made by Highline Warren, formally Warren Distribution. Mag 1 is Highline Warren's flagship oil. They blend for many retailers.

I have the service manual. See (F) page 36. There is a little gray plastic attachment part that is broken off. (F) was laying on top of...

The last two times I went to cut my grass, my mower would not start. This is a Gravely Pro Turn 260 with a Kohler PS ZT740-3046 engine...

Going to try to post. LMT-77 I would assume it is the 697592 nozzle as LMT is not list otherwise. Walbro says the Carb is Briggs PN...

It depends on the manufacturer of the drive unit. Find out what you have on your Scag.

from what I have read you can use 20w 50 motor oil for the hydros has anyone else done this ?

Read the Gunk product label. Be sure it's safe to use on plastic and rubber. Non-chlorinated brake cleaner works well. Hose off with water.

Want to let MParr in on update. Now I know why there is a Winter. I've been cleaning off 14 yrs of grime and found plague on the metal...

New member here, just started repairing a saltwater damaged Gravely 150 PRO (988059). Rebuilt the 14HP Kawasaki, runs great. New...

What is the problem with the blade? Or, is it the mower?

The G3 is not going to perform better than the Toro blade.

4.5" angle grinder with a 40 grit flapper wheel. You will get the hang of it. A nail in a tree or a cheap cone balancer is all you need...

I think the answer is that it wasn't maintained properly 😂