MParr's latest activity

This should sum it up...

Harbor Freight. Sheenist

My local Napa has most fittings and can order the ones they do not stock. Runnings and Tractor supply carry allot of these types of...

I despise them.

Update: The carb is on. One minor adjustment and immediate startup cold. It runs good, but I will change the plugs tomorrow and get a...

Never. Always use the air lift kits bolted to the blade. Best blade and deck on this planet. Will suck up spare change off your garage...

I usually immediately change out anything with a Torch in it.

Well I got better things to do than Pussy Foot around with this forum especially during my business hours. It only took an hour to get...

From the OP post I gather he is correctly using the gauge wheels as he said they sometimes dig in. Even here with my uneven lawn gauge...

People seem to think they are suppose to set the cutting height, and that may of been true on older decks that floated on the ground and...

SHAZAM

Let me see if this reply goes through.

some days it take 6 attempts to even get into the site. And then when you do it may go to 500 error before you are able to post a...

FYI: The gage wheels are not supposed to have continuous contact with the ground. If you are cutting at 3" or less, move the wheels to...

It's getting to where it's not worth my time.