MowerMark's latest activity

Irrespective of any internal damage, it runs/sounds fine so far. If anything more than a key is needed, I'd give it away. I'm not...

The key is typically part of the blade adapter, but since it is a Honda, they can't make things easy. The bolt is not sacrificial; there...

The model you posted has different variants depending on year. I did look at quite a few of the variants based on your original post...

I called Honda tech support twice, and both agents were puzzled over this "key". They had two part numbers: 94901-16150 90751-ZG#-000...

Is it a slot that is like a half moon, or one like a plain slot. That will make the difference where it goes, c/o huyett.com or...

WOW! Nice pix! It's a long groove just like the big pix (lower). I didn't see a small slot depicted in the top diagram. So how...

But sgkent posted. "The key flat side usually goes into the crankshaft.". Which is correct?

I am visually impaired and not mechanically inclined.

Is there a diagram of how this key fits in?

So it is not to prevent slipping, but to stop over-tightening?

Without the Woodruff key (3/16X5/8) the OP is depending solely on fiction of the parts to keep the bolt from over tightening and...

Why is the mower working well without this key?

Thank you. The mower works fine despite not installing this toenail clipping (key).

They deny any problem.

call the people who provided you the sod to see if they have any suggestions. If some Canadian goose flew over it and took a dump from...