Recent content by mowerman506@gmail.com

I have replaced all the steering components, from the column to the drag links and still the gears are slipping. Any help would be appreciated. Model#: YTH22V46

Hi all, I have a Husquvarna riding mower that the steering gears are slipping. I replaced both gears that connect together, all the bushings, and the steering shaft. Not sure what is the problem at this point.

I have a Troy-built 130 push mower that surges severely. I have replace the carburetor, air filter and spark plug, but still no luck. Help would be appreciated.

Hi All, I have an MTD garden tractor model#: 14AI808H718 THE front tires point out ward. I have taken the linkage off and tried turning the drag link in more but bottoms out. Checked the linkage bars to see if they were bent but they look straight. Not sure what to do now?

Hi all, I have a 16 horse power v twin engine model: 402777 that I have put many parts and hours into but will still not run! The specific details are; I choke the engine to start, but have to leave the choke on to keep running. After running for 2 to 2.5 minuets or less sometimes the engine...

My mower will not prime and I have replaced the diaphram gasket> not sure what to do :confused2:

When I turn the key on my mower the blades spin with the mower and I have the right size belt. Not sure what to do :mad:

I have a 16 horse power twin cylinder carburetor linkage is not working right a video or picture diagram would help. Thanks.:confused2:

16 horse power v-twin riding mower it reves up and down then dies.

I have a toro 17 horse power riding mower the vales need adjusted what do i set them to :eek:

I have a honda push mower can figure out how to put the gaskets on the carb appreciate some help

Ill buy any mower that's in the fort smith area:tractor: call 479-471-5508 thanks

I have a murray riding mower it dies when blade is engage not sure what to do model # 28v707