Recent content by Montecore

Ok think I finally figured it out with ILENGINE for lawnmowerforum.com....I always like to give credit where credit is do. It appears the Susa starter system has this problem when you push on the handle bar it moves up and down which in turn pulls the cord in an out of the recoil eyelet that...

Now I am thinking one of 2 things That's a brilliant idea what can I use for a metal clip? So I just pull a little bit out like an inch that place the clip to keep the slack from the starter to the handle? Or would I need more then an inch? 1) Figure out a way to keep the bar from moving up...

Thanks for the quick reply. What do you mean starter head portion? Is that the pulley, prawls, springs, friction plate? Once the engine is running on concrete and if I pull the cord next to the left side of the handle I can induce the squealing noise. So I am thinking it must have something to...

Thanks for the quick reply. What do you mean push handle up and down movement? Once the engine is running on concrete and if I pull the cord next to the left side of the handle I can induce the squealing noise. So I am thinking it must have something to do with the pawls not fully retracting...

The squealing starts after the engine is running. If started on concrete do not really hear squeal. Start to cut grass and will hear a periodic squeal coming for pulley starter housing after my research this is what I have done so far: 1) Removed the blower housing 2) Removed the black round...