Recent content by MikeinTassie

  1. M

    Model 130292 will not run unless fully choked

    Roger that!!! AND a big thank you for your advice!! Just the pump diaphragm fooled me :( Mike in Tassie
  2. M

    Model 130292 will not run unless fully choked

    Incase the flange is warped-- it isn't saves me flattening and sealing gaskests alone will be ok ! I found the cause --Chinese diaphragm!
  3. M

    Model 130292 will not run unless fully choked

    Found it New diaphram is Chinese! see the stick!!
  4. M

    Model 130292 will not run unless fully choked

  5. M

    Model 130292 will not run unless fully choked

  6. M

    Model 130292 will not run unless fully choked

    Found it!!! See the stick in the image, brand new diaphragm does not seal :( Thanks for your trouble :) MIke
  7. M

    Model 130292 will not run unless fully choked

    Andrew, I'm in Tasmania! The backside of the world, give me one more go at it, but we are selling the property and little time right now, Cheers Mike
  8. M

    Model 130292 will not run unless fully choked

    Thanks Boss, will try it that way ;) Mike
  9. M

    Model 130292 will not run unless fully choked

    OK , Andrew, I'll chase one down -- they sell em from Aliexpress in China for cheap! First I'll have another look at it, pull it off and make certain it's sealing where it should ! Thank you heaps Mike
  10. M

    Model 130292 will not run unless fully choked

    Hi Bertrrr, I do realize that and have been very careful to do it right with the install. Even replaced the diaphram, just doesn't make sense!
  11. M

    Model 130292 will not run unless fully choked

    Hi Andrew, this thing may well be the same animal! I, like you will miss the reverse, I think, may pull the carby again and try to seal it with something sticky! :)
  12. M

    Model 130292 will not run unless fully choked

    I put fine gravel and sand in the tank-- vibrated it and then put compressed air in the really get the tank cleaned out -- it's got a dull shine in there now! But, thank you Star Tech!! Have epoxied a tank before now, works well, epoxy then a layer of paper and a little more epoxy. I didn't have...
  13. M

    Model 130292 will not run unless fully choked

    I really wish it was that simple, no leaks at all, thanks for the thoughts :)
  14. M

    Model 130292 will not run unless fully choked

    Thank you Skippydiesel, the jet is clear, tried 6 settings from go to nearly falling out! I have to put my thumb over the intake to seal it before it'll start then it runs like crazy! BUT Remove the thumb and it dies! It is the strangest fault I've ever come across!I guess I'll have to get...
  15. M

    Model 130292 will not run unless fully choked

    My 1998 ish tiller will not run unless fully choked and some gas goes down the throat! I had the carby cleaned and replaced the gasket on the side of the barrel, needle adjustment makes NO difference ---- :( has anyone got a cure for me, please?? Best wishes Mike! Mod 130292 Type 3089-01...
See more
Back
Top