Here is video of where im at and video of engine running
Only thing that I may have over looked in using new fuel line?
I have new shut off valve and new fuel filter
Have changed the multiple carbs but still could have got some debris in carb??
This is where im at!
The engine starts right up and don't notice any drag but its still rough not really rough but not right with a bit of a sputtering
I have sprayed around engine for air leaks and plugs to look for spark trying to ground to engine!
I've tried new spark plugs!
Put 3 different...
It's running now governor working
With dash at slow idle can get it to idle almost where I want it but have to push to idle screw a little
That is without the spring that goes to tang
That spring gives to much tension and will pull up to higher idle speeds
This all with air cleaner off
If I...
Ok new problem
Only running on one cylinder??
Found by accident
Pulled plugs to check them one dirtier than other cleaned it up a bit put back in and engine running perfectly!
Then I looked and saw forgot to put wire on the dirtier plug side!
Put it back on engine runs rougher!
Pulled other...
I went the long way around on this one
But know how change a governor now! haha
Now need to see if i can adjust everything to get engine to smooth out!
Ok
I got it
Its running rough with new carb
So need to adjust some things!
Maybe i can send a video of how it sounds??
I need to adjust spring to the tang and that is close to where it needs to be just a bit rough over all idle!
I thin
Think I made some headway!
I hope i wasn't this dumb but I removed wire from dog leg to the adjustment screw this allowed the governor arm to travel further to counter-clockwise and hopefully closer to thimble for static adjustment!!
Start engine and the throttle plate is closing i...