McTurff's latest activity

Messing with linkages getting close idle is rough!

Lets try again -- one of these times you may just get it right! Hope you don't take this as I'm insulting you, as I said before just...

I suspected such. Your low idle issue right now is with the mechanical linkages and not the engines governor. First: You are going to...

Ok I got it Its running rough with new carb So need to adjust some things! Maybe i can send a video of how it sounds?? I need to...

I thin Think I made some headway! I hope i wasn't this dumb but I removed wire from dog leg to the adjustment screw this allowed the...

I have done this Wire on governor arm and I can close throttle plate to bring it to idle! When running! The throttle control will not...

I'm trying to take all this info and apply it! Yes wish I had a pair of knowlegable eyes to see what's up with this engine! I think this...

If you can control the speed by moving the carb lever to touch the idle speed screw, you don't have a carb problem. When starting and...

Couple questions: Can you hold the carb linkage at idle and get a slow idle? (I'm talking about holding the carb shaft against the idle...

By the video you have everthing correct on the inside. Not that you do not know what youi are doing, you seem quite knowlegable. But I...

You mentioned changing the carb. Not likely the carb with the symptoms you said. Them Briggs twins only used two types of carbs a 3...

I had the original carb on it when I first got it running but put another carb on CHINA I will take a look at it tomorrow I cleaned up...

I have adjusted it so many times each way. That it's driving me crazy. There's no way that I could have got it wrong after doing it. So...

Here is my video I feel kinda defeated but maybe still be some good info for someone! At least it shows some detail of this engine...

Yes I understood after reading again Anyway Got it back together same thing!! Adjusted governor Running wild i videoed my whole...