Recent content by man00

Looked at the parts diagrams again and under the tractor, only found two on the axle one on each side. None on the hubs and none on the pivot thanks

I'll look again, thanks

I could only find two in the front axles..are there more?

Thanks

Could you post or send me the link to the product? thanks

Anyone using any aftermarket blades on their mower ? The ones I looked at seem to be not as thick as OEM Think the BB OEM part is 038-0001-00 thanks

I adjusted the tensioner that the cable is very tight ..still lots of slack in belt and the arm is moving free I may adjust the tensioner back a little to prevent the cable from breaking

How bad of a job is replacing the drive belt? I was wanting replace both the deck and drive belt and any pulleys or spindles that need it at the end of mowing season...Its a 2013 model with 240 hours..Like to start the next year mowing season without any issues if possible.

44" deck, I noticed the blade slow or stop when going over grass rows or anything over three inches tall. With engine stopped and blades engaged looks like there 5" of slack in the belt. Is it possible that the belt has stretched that much?...Belt has never jumped off or anything but trying to...

Thanks for the info

This is a Outlaw extreme 54" deck How in the heck are you suppose to add grease to this grease zerk ? The zerk is way to close to another pulley to get grease gun on. Possible to remove this and add 90 degree one Anyone happen to know size zerk badboy uses thanks

Sorry for the posting error

I see Castrol stopped making the 50w dino oil, anyone using the 20w-50 ? I don't think there would be any issues using it??

Thanks

This is on Outlaw 54" can not find any info in the manual