lumpymags's latest activity

Well done sir.

To finish off this thread a lot of great info you all gave me thank you. I think I put a period there. It was the rings and I figured...

Breather is functioning good and very clean after when I pull the pistons out the rings in the lower cylinder were not spaced 120...

Breather is functioning good and very clean after when I pull the pistons out the rings in the lower cylinder were not spaced 120...

I wanted to update everyone on this problem I took the engine out last night and tore it down today this mower is a 2017 model with 218...

After some talk with my friend i think I left out a big part when the dipstick is removed it will shoot oil out for a distance so I do...

Leak down test 6 to 7 percent on both cylinders and that me trying to hold and plug in at 100 psi

This would be the first trouble I have had using them I use the thinner and move it back and forth with little pressure until clean

I do the 3 phase torque on heads as you say quick and why not I do not do sanding I guess I should try that from now on I do know the...

All were done to spec I always use scotch Brite pads remove everything and brand new gaskets I never reuse and I torqued to the exmark...

Severe amount of white smoke problem is this winter I rebuilt it split sump everything looked great new head gaskets and the valves were...