Recent content by lkaskel

Thanks so much!! I just ordered one. Should be here by the weekend. Without the correct filter housing to copy, do you know if the notch is just angled to go into the main air inlet or does it do something trickier? I was thinking that I could drill/cut a slot on an angle towards the throat...

I wonder if I got the correct gasket I could modift the housing to meet the need? Does anyone know the part number for the gasket?

Sorry, I did not understand your reply. I need a different air cleaner and gasket for the carb I have?

You are correct that the filter base you show is what this engine has but it does not have the inside notch for the hole in question. The gasket at the top is one they used. I am assuming that I have mixed parts that do not work together. Let me know your thoughts once you see the pics I...

Hi Everyone, Thanks so much for your replies!! Here are some pics to help you understand this setup...

Regarding the oil change frequency and low oil. I changed the oil and filter, air filter and fuel filter every year and I averaged 40-50 hours a year so I am well within the hours requirement (listed at 100 hours). I also had recently checked the oil and it was good. I know it's super easy to...

Hi Everyone, I have a Husky 18 ton log splitter that has a Briggs 110412-0158-E1 engine on it. It may not be the original engine because it has a Yard Machine label on the rewind pull starter. I bought it used a few years ago and it has never run great but it does start every time and it runs...

Is that in the FS651 or FH661? Or both?

Well, here is the update. I picked the mower up and it, of course, runs great with the replacement engine. The guy at the shop did say that there was not a nest or any debris under the shroud or in the fins. It was a connecting rod that broke and he said that he had seen this before engines. He...