Recent content by Lawn Ranger Don

I do a lot of backing up while cutting so I purchased a Toro zero turn that doesn't have that button to fool with. Just another thing that can go wrong.

I'm using mulching blades with a bagger and its works real well. I too had cutting blades and would fill up six recycle cans of cut up leaves. I changed the blades to mulching blades and what a difference. I would fill up only two cans. The mulching blades would cut the leaves up into a powder...

Its absolutely slow. Then I always have to log in.

Make sure the cables are tight. Mine was doing the same thing when it was brand new and I noticed the battery cables were loose. Mine probably wasn't charging while running. I also think the hour meter I installed drains the battery.

My meter on my Toro stays on and my battery went dead after two years so I'm thinking it drain the battery since it wasn't used during the winter months..

I have a Toro My Ride 50 inch zero turn with a bagger attachment. Almost every time I go to open the back end, the whole back slides off. It has become a nuisance so I fix it so it won't come off. I drilled holes through those tiny stub it sits on and put a cotter pin in the holes. I did it to...

I fill up 8 recycle cans of leaves every week for about 5 or 6 weeks for county weekly pickups in the fall. I have a bagger on my Toro. I have cutting blades that came with the zero turn. When I empty out the two bags of leaves I fill one and a half recycle cans and I'm thinking if I had...

I've been using regular on everything for 50 years.

I park my equipment in a shed and really don't want to run 200 feet of electrical cord out to the shed and through the window with a battery tender, I ended up buying this at Home Depot to jump start it . I leave it in my wife's car in case she needs it.

I bought a Duralast 800 amp jump starter at Advance Auto and got it home and turned it on. No lights, so I plugged it in over night and still no lights. Nothing. I took it back and they refunded my $90. They said it looked used. I told them that's the one they gave me yesterday and all I did was...

What jump starters for zero turn mowers your using? I'm thinking of buying one.

I replaced my 5 gal. gas cans with these EZPour nozzles. Here I installed them. Then this happen. EZPour became EZ Leak. Gas all over the concrete patio. So I replaced the EZ Leak nozzles with a red cap and now I use this pump. No spillage at all.

I found this in Pittsburg. https://pittsburgh.craigslist.org/grd/d/beyer-craftsman-bin-bagger-complete/7677672060.html

Unfortunately I don't. I'm trying to remember where I bought it. It was a long time ago. Amazon does sell bottom chutes but there's no guarante they fit. https://www.amazon.com/Craftsman-Catcher-532405455-Compatible-Description/dp/B086DQJLVH

I had the same problem with my lower chute. I kept buying chutes and returning them until I found one that kind of fitted to the deck. But then, when I put the other chute on it became short of going into the bagger. So I bought this sheet metal and wrapped it around the chute and forced it...