kjonxx's latest activity
-
Kkjonxx replied to the thread Prestige 50" Raise Cutting Height.Set the parking brake as that usually bypasses the seat and brake switch.
-
Kkjonxx replied to the thread Carb Still Leaking After Parts Replacement.The hole looks rough and off center, china made ?
-
KThe Harbor Freight lawn tractor jack is worth its weight in gold !
-
Kkjonxx replied to the thread Why yth24v48ls is eating belts?.Its obvious that something is eating the inside of the belt, check eng pully for debri's and then all areas where it runs. I agree that...
-
Kkjonxx reacted to Etbrown44's post in the thread Briggs Intek, replaced everything, still surging.. Ideas? with
Like.
Been doing small engine repair 65 years. Have installed 100s of Chinese carbs and only encountered 2 or 3 bad ones. Those odds work for me. -
Kkjonxx replied to the thread Briggs Intek, replaced everything, still surging.. Ideas?.Check the flywheel key
-
Kkjonxx replied to the thread How to fix this sound - Briggs 500e series engine lawn mower.Blade bolt can be tight but if keyway is worn the blade can still rock, I have seen it.
-
Kkjonxx replied to the thread How to fix this sound - Briggs 500e series engine lawn mower.Is it possible the blade adapter is loose?
-
Kkjonxx replied to the thread How to fix this sound - Briggs 500e series engine lawn mower.I agree and I should have said to remove the plug then tip on its side and rotate the blade
-
Kkjonxx replied to the thread Engine Surging.Plugged gas cap ?
-
Kkjonxx replied to the thread How to fix this sound - Briggs 500e series engine lawn mower.Crank is bent and blade is hitting thus the vibration and constant banging. Look uner deck for shiney spot to confirm.
-
Kkjonxx replied to the thread John Deere D140 with 22 hp v-twin briggs.That was my first thought, bad seat switch.