Recent content by Keljan11

Mower was still stalling 3-4 seconds after starting. Took off the air filter, and removed the carb. Checked and rodded the main jet bolt (fuel bowl nut). It was clean. Checked the ports on the carb for blockages, blew carb cleaner thru all the openings. Put it all back together. Put on a new...

Yes, weve owned this mower for a while, but it ran so well before we stored it, i decided to keep it around (as we have the room on the farm). I had just cleaned the fuel bowl, and the little brass jet nut (and the 2 small holes in it, as I had it partially apart to change the primer bulb...

Hey all I have an older B&S 6.5 hp push mower (model 944.361543), that hasn't been run in maybe 7 yrs. It's been stored in a shed, fuel was drained when put away. Put in new gas, pumped the bulb a few times, 2 pulls and it started up. Ran great, but gas was running out of the pump bulb. Shut it...

With my pressure washer, I have to make sure there is water running thru the pump, and I often pull the gun trigger when pulling the start rope. Almost always starts, 1st or 2nd pull