kbowley's latest activity
-
kbowley replied to the thread Briggs Intek, replaced everything, still surging.. Ideas?.As I said, when I have seen one run correctly with my own eyes, I'll believe it. Until then, I'll stick with OEM. I have replaced... -
kbowley replied to the thread Briggs Intek, replaced everything, still surging.. Ideas?.Until I personally see one small engine with a Chinese carb run correctly with my own eyes, and I have been doing this for 40 years and...
-
kbowley reacted to slomo's post in the thread Briggs Intek, replaced everything, still surging.. Ideas? with
Like.
Since I stopped buying the cheapest "China" carb, my luck has drastically improved. Maybe a get what you pay for deal??? Meaning buy a... -
kbowley replied to the thread Toro model 20331 6.75 Briggs no choke/no prime cold start issue.Remove the fuel injector and soak it in bug spray! Works every time!
-
kbowley replied to the thread Briggs Intek, replaced everything, still surging.. Ideas?.Until I personally see one small engine with a Chinese carb run correctly with my own eyes, and I have been doing this for 40 years and...
-
kbowley replied to the thread 2012 Bad Boy MZ with Kawasaki engine, Left transaxle problem..Click on the link in my post. However, Star Tech is correct: 150 for shipping. I believe you can purchase the rebuild kits from...
-
kbowley replied to the thread Briggs Intek, replaced everything, still surging.. Ideas?.Buy an OEM carburetor.
-
kbowley replied to the thread Intek 12.5HP cranking but not starting fuel coming out exhaust manifold gasket t.Alternately, with the carb off the engine, remove the bowl and let it dry of gas. Invert the carburetor and use your mouth to create...
-
kbowley replied to the thread Intek 12.5HP cranking but not starting fuel coming out exhaust manifold gasket t.I believe he said it was blowing fuel out the exhaust rather than the carburetor. Respectfully. Kevin.
-
kbowley replied to the thread Intek 12.5HP cranking but not starting fuel coming out exhaust manifold gasket t.Could it be possible that the engine was flooded by continuing to crank it with the choke fully engaged? Did you pull the plug and see...
-
kbowley replied to the thread LTX1000 transmission not engaging.Is this a hydro transmission?