jono252525's latest activity

Your right , I did not know that I had to balance the flywheel. I think that I will have to drop that idea and find another generator...

Well I did see a video that a ring gear can be fit on the flywheel but the guy is not giving the part number and for a clone starter...

I have a Coleman Powermate 5000W Year 2006 with Tecumseh model HM100 10hp generator with pull start I would like to install an...

I did that after rebuilding the engine but I will check them again. Thank you

Craftman Generator 6300 Watt with a Briggs Straton engine 11 HP , The model is 10T802 and the Type is 1130 B1 and the Code is...

So conclusion , I found a spring that fit and the clone cab is working fine now

I made the hole bigger in the new carb pilot jet and right now, it is almost perfect. I am trying to make a spring that will fit over...

Thank you for the info Star Tech.

Well your info a bought the original cab that are simple repair was not the case here since a local dealer did try before me to fix it...

Well, I guest that If I have to buy a OEM carb, then I will trash the unit because you can buy an other generator for $275. Perfect for...

I have a Coleman 5000 generator with a Tecumseh 10 HP engine model 159493X with carburation version 1003C serie: 06187CB1137 The...

Like I told you Star Tech, I would let you know how it went for honing my cylinder, It took me over 40 hrs to make it good with in .002...

Thank you for the informations.

I only need the tork spec for the generator Generac model 5500LX, Rotor bolt and Stator bolts.

Yes