JimP2014's latest activity

I might be posting this twice but I posted something on the first page I don't use forums that often but, But I said I believe I have...

So I believe I have essentially the same engine but let me be more specific the same flywheel on an older machine I could pull the...

Thanks Tiger I did research yesterday and for me I decided on this method: Stick (Shielded Metal Arc Welding - SMAW) How it works: Uses...

This is not about spending 200$+ to get this muffler to work, it is about learning and making use of this equipment for other things too!

Thanks StarTech I don't understand what you are saying but will this, "TITANIUM Easy-Flux 125 Amp Welder" allow me to weld the exhaust...

If you were doing this what equipment would I need? Also what would type of welding is this called, to look up training videos? For both...

This is actually very funny so I asked one of these AI agents that if I changed Husqvarna muffler with some alternatives and it said...

Okay thanks I see what you're saying I mean so I use the metal paste it's on no it's on that flange area for the muffler I'm just going...

Okay thanks for this information it was probably a couple years ago where I adjusted most of what you're referring to it's actually been...

Maybe so but as an example I just purchased an 11" tablet not a fancy name brand and paid $84.00 and even better it runs Android and...

Just ran the lt2000 for 15 minutes under load + I have a photograph of what the temperature was near the exhaust pipe muffler interface...

First off I'm absolutely against gambling especially in pro sports. But if I run this JB weld paste job and I'm not going to say very...

Startech thanks for that insight you know I would never know I see I guess six spot welds and I never really thought about it but that's...

And if it doesn't melt today it could melt on another day I mean I understand the whole deal from the way it's being explained so let's...

But actually since I put that high heat paste on the muffler I'm definitely going to try the setup later today so I did some research...