JimP2014's latest activity

Rivets you have no idea the things I've found so with the other small idler pulley and with the mower deck completely separated from the...

For me I see no other solution I don't have the skills to somehow braise some sort of shim to get the angle back. And the truth is this...

So if the pulley doesn't track the way it should this is how I solve the problem with duct tape I put multiple layers directly onto the...

Okay here's my final idea I'm going to take duct tape maybe one strip maybe two strips I don't know + attach it to the underneath side...

I'm not sure what I'm actually uploading but what I did was I took a piece of cardboard and I put it on one side and it goes underneath...

Hi Gord, thanks for your reply I am working on that. I did find you can't actually tighten down the small idler pulley ARM to much...

Here is my latest idea, remove the customer supplied washer meaning me, and somehow put a shim maybe on one side like 1/2 a washer and...

OK here is the latest image from 30 mins ago. I see what Freddie21 wrote and so this pulley is tilted, I could see it when I was...

And the reason why it's such a big deal is because when I tighten that bolt down which has the Husqvarna special washer below it it...

So I took a screenshot of repair clinic they have it set up exactly the way I do. In fact repair clinic has it 57,56,55 but Sears has it...

Okay I just went back outside again it's 7:00 p.m. on Friday night and I found the small idler pulley is attached to this metal bracket...

OK I messed up. It needs to be 34,59,145, and 40. I have some of it correct. I have the small idler pulley where it needs to be and the...

I have it the way the parts diagram shows it, and i think it could be wrong? T or F?

This is the small idler pulley side, and inside that yellow rectangle I have that special raised washer. I think this is on the wrong...