Recent content by Ips

  1. I

    Tracks between blades

    Thanks all, pulled the deck off today for really good look. Blades ok but resharpened them any way, blade tips less than a finger between them and even. Two things I did note The belt had developed a twist and had a split that probably let go next operation. The deck had 2 fractures either...
  2. I

    Tracks between blades

    I think I may have mislead people calling them tram tracks but it was the best way I could think of to descibe, the lines they are not depressions they are uncut lines between the blades. Sorry for the confusion
  3. I

    Tracks between blades

    You may have solved the prob. I'm actually in SA. The area that this is a problem is primay school ovals with sprinkler systems that aren't manged properly. This seems to be most noticeable where the sprinklers overwater areas and the ground is soft. Ill recheck the widths when I'm back there...
  4. I

    Tracks between blades

    Three brand new blades previous cut all in good condition and level.
  5. I

    Tracks between blades

    Yes the grass is damp, its autumn going on winter downunder, but this was not a problem last winter. The blades are new and supplied by the JD dealer.
  6. I

    Tracks between blades

    The tracks are left between the blades. All specs are correct and checked again every 2 has but not change. The deck is level as per john deere instructions, I've tried the anti scalp wheels both clear of the ground and on the ground no difference, in fact off the ground causes an other problem...
  7. I

    Tracks between blades

    7394 thanks for the reply. No its clean underneith an if I reduced my speed any further i be in reverse.tried attaching a pic but it keeps vanishing
  8. I

    Tracks between blades

    I currently experiencing experiencing tracks being left between blades. Running a 48in 7 iron jd deck with 3 blades. The blade cut is fine and even but I'm getting 2 tracks left between the outter and inner blades, running out of ideas where to look. Yep, tire pressure is correct and the deck...
Top