ILENGINE's latest activity

  • ILENGINE
    ILENGINE replied to the thread When a battery is really DEAD.
    Most are in the range of 2.3-3.3 ohms.
  • ILENGINE
    ILENGINE reacted to Rivets's post in the thread When a battery is really DEAD with Like Like.
    Sounds like your charging system is not working. With engine running, at full speed, and no blade engagement, measure voltage across...
  • ILENGINE
    Overfilled or mower being tipped in a direction that is allowing oil to enter the breather where it can flow into the air cleaner. Or...
  • ILENGINE
    ILENGINE replied to the thread Craftsman DYT 4000.
    I was editing my post when you responded so may want to go back and look at what I added.
  • ILENGINE
    ILENGINE replied to the thread Craftsman DYT 4000.
    The bottom bearing in your electric clutch has seized and is now turning the deck drive pulley on the clutch instead of freewheeling...
  • ILENGINE
    ILENGINE replied to the thread K301.
    And then after you get the spark issue fixed, then you need to concentrate on setting the timing.
  • ILENGINE
    ILENGINE replied to the thread Cant ID drive belts old yardman.
    The problem is your standard dimensions do not apply to John Deere or MTD/Troybilt/Cub Cadet belts because of unique width., depth, and...
  • ILENGINE
    The cap contains charcoal. They have since around 2003-2004 when the new emissions standards started kicking in. It was one of the...
  • ILENGINE
    ILENGINE replied to the thread 8HP Briggs Governor Shaft Leak.
    Parts diagram suggest that one was used. Some engined didn't come from the factory with it installed. There should be a recessed area...
  • ILENGINE
    If fluid gas has entered the charcoal canister it turns it into a solid mass which basically requires the replacement of the cap.
  • ILENGINE
    Most likely the vent is in the cap which also has a charcoal filter canister built into it. So the charcoal could be gas logged, and...
  • ILENGINE
    ILENGINE replied to the thread Need help with wiring.
    Wiring loom is the wiring harness. To @Kingcat MTD is not well known to provide wiring schematics for some for their mowers, and...
  • ILENGINE
    ILENGINE replied to the thread DGT6000 runs rich.
    Similar discussion occurring here https://www.lawnmowerforum.com/threads/cv730-has-me-stumped.82047/
  • ILENGINE
    ILENGINE replied to the thread CV730 has me stumped.
    Changing jets may help. Seems like the Amazon carbs that I have received have all run rich. At least the Kohler carbs, Not so much...
  • ILENGINE
    ILENGINE replied to the thread CV730 has me stumped.
    Was that carb replacement with an OEM carb or the Amazonian chinesium carb that could be part of the run issue. I have had issues with...
Back
Top