ILENGINE's latest activity

@StarTech, could the seal and O ring be included in the 70740 seal kit for that hydro

The truth is most repair shops are not qualified to be called a repair shop. Dealers will replace crankshaft seals in engines and tear...

May still have water in the pump, since the HP pump on kohler has a float and internal screen like a carb bowl.

If the filters are prior to a pump air space maybe visible due to the expansion chamber effect of a fuel filter, and the natural...

532427497 Jonsered is owned and made by Husqvarna.

The only thing I can say is welcome to the world of battery operated tools where the companies have no intention of supplying parts past...

Fuel valve shutoff in the fuel line will keep it from overflowing into the carb while not running. Also be aware that the fuel solenoid...

Compression most likely won't even fire at 100 psi. Has the engine been started since the rebuild or is this the first start attempt...

The bottom push rod is aluminum and the top one is steel Unless the aluminum push rod has a groove worn into that shiny area I would...

And will leak even worse with the flat paper style gaskets if the intake warps

And most of those can be traced back to using a fuel filter that has the wrong micron filtration. The pre-filter for the main pressure...

I normally replace the entire plate because most of the time when the issue rears its ugly head the push rod has chewed through the...

If single cylinder OHV intek engine the valve cover gasket could be leaking and dripping on the muffler which could be what lead to the...

The JD S240 lawnmower uses a Tuff-Torq K46 transmission which is the reasoning behinds @StarTech post

The Tuff Torq K46 series does not have a sight glass. In order to check the fluid level the transaxle must be removed.