ILENGINE's latest activity

It has been a few years, but seem to think it was Hondabond 4 or do they make a 3. Anyway. It seemed to work fine on sumps, and some...

The last tube of Hondabond that I used turned black, crispy, and would start leaking within 15 minutes of starting the engine. Seems...

Also something else to look at. When you pull the trigger on the gun, is the engine closing the choke. and then sticking it shut...

The air cleaner base doesn't have a vent hole that corresponds with the bottom center left vent hole on the carb. I think that is were...

I think the TPS is fine. The code 22 is either an issue with the wire, a pin fitment, or is a false flag issue that is a side note for...

I don't know your engine/carburettor Sounds like the engine is running rich, when you attach the airbox . I think you may have hit the...

Looks like that mower uses the Tuff-torq K46 tranny which is not known to be the strongest unit But keep in mind that with a...

I would look at item 19 parts number 56418MA item 22 part number 55168MA which may be NLA...

If that is the clutch I think it is there are 3 holes around the outer perimeter that coincide with notches in the scalloped part of...

So does Kohler/Rehlko, Honda, Briggs, MTD, Kawasaki

Here is code 22 and 31 diagnostics And looks like fuel pressure is suppose to be 39 psi +/- 3 psi so your 36 is just on the edge. And...

In @Turfspray case that would not be true. The issue isn't the sharpening grinding down the blade. The issue is the Florida sand, or...

We need the model and spec number off of the engine. to better understand what carburetor and air cleaner you are dealing with.

Make sure you don't have gas in the oil, which can get drawn into the intake through the breather tube leading to a rich run issue from...

Like start with the model, type and code from the engine so we can see which of the thousands of different engines that briggs produced...