ILENGINE's latest activity

The diagram also shows the one in the OP picture on another page of the IPL. I suspect that the carb has been replaced at one time...

Unfortunately those number are worthless for looking up part. Your first number is a casting number from the carb and is something is...

I have never seen a snow blower of any kind here. But looking over the IPL I see it has an idle speed adjustment since it would after a...

First thought was to see about a leakdown test, but then looked up the model number and found it is a 2 stroker. So I am thinking...

If it is leaking at the head, it is usually the valve cover gasket.

Most electric pto clutches has a brake that is supposed to stop the blades from turning after it is disengaged quickly instead of...

Have replaced the aluminum with steel a lot of times with no problems.

There is a number one and number two head. The number 1 is always the cylinder closest to the flywheel. Also If I remember correctly...

Winter

According to Toro the transmission used is a 104-1760 which translates to the hydrogear 310-0510 transaxle. Hydrogear list 79 oz of...

Engine brake only used on push mowers. And the reason for the hard pulling and the same reason for the long spindown is because vacuum...

Sorry ILENGINE,. My mistake. I was misinformed when I did a quick internet search this morning. Personally. I mistook the 7000 series...

Quality wide about the same, but the Briggs has some upgraded features that the other two don't I would choose either the Kaw or the...

The 7000 does not have hydraulic lifters. Still mechanical lifters since it is the newer version of the Courage twin. The only one...

One step below