ILENGINE's latest activity

Im usually able to grip the heads with Irwin vice grips and get them out that way

If the carb is a Nikki or Mukuni carb they are NOT Phillips head screws they are JIS screws. Indicated by a little dot next to the X shape.

Item 50 part number 683-04176A sub to 783-04567B

I suspect the anti rotate bracket has come off or not connected allowing the tranny to tilt. Picture of frame to axle mounting bolts...

Being a '11 model has you checked the CVT pulley bearings [6203-2RS]? And there is no adjustment related to the CVT pulley to transaxle...

Heavy scoring on piston in picture. Stop and don’t do any further work on chainsaw. Leave muffler off so you can show customer or know...

Or owner didn't add enough/any oil to the fuel

My questions: 1) Is 125 psi sufficient compression? Yes 2) Assuming compression is sufficient and given that crankcase holds vacuum...

If you have a tax ID number you can get a Stens account and buy tax free. Also Stens has store on amazon. Parts are a few dollars more...

Very odd that both would fail at the same time. But will also consider the fact that they may be related. Engine codes would be...

On the Intek V-twins the push rod will fit through the oil drain back hole from the push rod cavity. Could be the push rod got jammed...

I don't think he is talking about the flywheel key shearing..He is talking about the keyway on the pto end of the crankshaft being...

I'm kinda getting the drift from all the people who have had first hand experience with this "little yellow gadget" that this is a not a...

I use NO-Ox myself on some items. Use lots of dielectric grease around the shop, just not on electrical connections

That why I use an electrical grease that is suppose prevent oxidation in the household electrical panels. It is conductive.