ILENGINE's latest activity

Talk about confusing. That deck uses the 1732354 or 1732354SM spindle pulley which appears to be the deep groove. The parts diagram...

Just got 4 more for the inventory a couple weeks ago for the spring stockup order, and there was no backorder or delay in shipping...

Or in the case of the old Kohler K-series it was recommended to replace the head bolts. The understanding was the bolts were designed...

With the valve gaps set correctly, and the spark plug removed for easier engine turning, turn the engine by hand while watching the...

In this case I don't think there is a single fuse or fuse pin that isn't corroded to the point that all of them are probably causing...

Looking at things. Thanks for mentioning it!

I have been seeing cannot load this page errors, and slow to load pages.

Hmmm I trying how a normal ground [- dc] seat circuit will short out the positive [+ dc] circuit. I me it sounds like a partially...

Once upon a time there were typically .010,.020,.030 oversize pistons. Most mower engine manufacturers have dropped the .010 and .030...

Shuts down as if you turn off the key doesn't sound like fuel issue to me. Loss of fuel issue normally will spit and sputter a few...

Have you had one of the wheels off and left the key out of the axle?

Sounds about for JD lately. I pmed you a source for the SM; Just can't make it public knowledge we businesses got to keep somethings...

Lets start with the actual 7 digit model number from the model number tag since there are 17 different models of the IS500Z. And then...

Does anybody have the wiring schematic for the gator XUV 620i. Had a customer bring me one that will not start after fuel pump...

Will need more clarification since the 4622 brings up Zero turns not lawn tractor style mowers. And if this is a Z turn than it would...