ILENGINE's latest activity

Both Partstree and my Husqvarna distributor show both the cable and the rear drive unit in stock. Hope you are sitting down and really...

If you are seeing cracks at the axle mounting flanges on the frame that normally means that the front transaxle support has either...

My first thought would be head gasket. But also wouldn't overlook a possible valve cover gasket leaking onto the exhaust. Make sure the...

It's toasted, the magnet coil is melted down. It was likely noisy for quite a while has the bearing failed.

Well the server is being monitored more now. I did find a misconfigured script that hopefully was the culprit with our constant...

Your efforts are appreciated; some very good members have dropped out due to the hangups. We are all just trying to help people the...

I am monitoring it and have been noticing the slowdowns. I haven't been able to find what's causing them yet, but I've put more active...

Hello ILENGINE, You are correct. It's on the right side of the transaxle assembly for this model. My old Huskee garden tractor is a...

The tensioner pulley mounted on the arm should not be floppy. Chances are it has a worn bushing or bearing and needs to be tight and...

No shifter, this is a foot controlled hydrostat. and from the diagram can't determine real well where is actually connected. But...

Flywheel key sheared, camshaft not properly times to crankshaft, points not set correctly, and in some cases reuse of head bolts can all...

Issue is with the operator presence switch, or the associated wiring circuit.

Its item 24 on this diagram. Located behind the direction control on the right side of the transaxle...

My guess would be either there is a bad/burnt spot in the belt which is narrower than the rest of the belt, or something stuck in the...

From the parts diagram this mower has the straight keyswitch with no RIO override. owners manual states will kill the engine if put in...