ILENGINE's latest activity

I think there is more to this story that what has been told. If he is tapping out the filter. Is he getting enough dirt and dust into...

When was the last time the valve clearances were checked. Could of dropped a push rod on one cylinder which would cause lose of power.

I have some thoughts to what could be the issue, but without knowing what 19 hp Kawasaki engine I am only guessing. Having the...

Most likely your carburetor is plugged up, you need to remove and clean it.

I suspect that the float valve is not sealing allowing overfilling of the carb. When you turn off the key it is killing the fuel...

I suspect that this is what you are looking for but looks different than whats on your due to superceding part numbers and module...

To anyone out there honoring Memorial Day, I say Thank You. I am a surviving veteran and lost a lot of good friends over the years...

Lets not start guessing and start with the model and serial number of the mower so we can look up wiring diagrams. And if possible a...

I contacted Muhammad last night on the sister site to this one, and he replied that he would check into it. But haven't heard anything...

For me being in the business for the past 27 years it has come down to more issues with the mower side of the equation and not the...

4 stroke engines normally don't over-rev even with a air leak due to governor action. I suspect the fuel issue is a symptom not an...

Thanks, Rivets from a veteran. Even though I served during peace time there is still sacrifices to family and friends.

Muhammad was on tractorbynet the sister site to this one 20 minutes ago,

No. Some have Briggs and Kohler engines depending on model.

Never saw a Craftsman or Husqvarna that required the operator to be on the seat to start. Clutch/brake switch pushed down, or parking...