ILENGINE's latest activity

When the handle bar moves up and down it pulls the starter rope out slightly which causes the starter pawls to extend enough to contact...

You have the Susa starter system. What I have found over the years with that system is the push handle has enough up and down movement...

I can't speak for Rehlko as I have zero experience with what they have done with Kohler but, Koher always advocated, if room will allow...

Was the donut valve seat installed correctly and not upside down, which can cause a different float height. Also was there carb cleaner...

Leave it to Rehlko to design an engine were you can blow it up by installing the wrong length filter. That is set up like that to...

Engine should be a GCV160LA0-S3A Up to serial number 3151054 uses carb 16100-Z0L-853 MSRP for the complete carb is $17.92. After...

It would help to look up the carb used if you bother to post the model and spec numbers of the engine. Don't if single l or twin barrel...

The plastic intake manifold issue is something that pops up at random on random engines. Most of the time it shows up as a rough run...

It could be a case where the plastic intake manifold is heat warping causing an air intake leak which will effect idle rpm.

10 amp for lead acid battery; although, 2 amp is slow charge way. 50 amp is considered jump start method for automobiles.

Did you use OEM Troybilt/MTD/Cub Cadet belt or generic size doesn't fit correctly belts.

About 8 ounces different in fluid in most cases. And the engine manufacturer makes the decision to how the oil is checked for proper...

Depends on engine manufacturer. Kohler, Kawasaki, Honda all have the dipstick set on top of the threads. Briggs has you screw the...

And even in some cases the diagrams don't show the carb kit. Even in cases where one site shows the kit, but another has no mention of...

Kawasaki as well as Honda don't offer complete carb repair kits like the American counterparts. All parts have to be sourced individually.