hlw49's latest activity

Kawasaki Had a recall on the FX921 and FX1000 several years ago where you replaced the heads and cam shaft. We traded for a Cub Cadet...

What number would one call.

Sorry about that it was the FX921 and the FX1000 are like that.

Had a salesman describe it like this one time. Said it was like the principal of Spaghetti when it is cold and dry the additive to make...

Did you clean the exhaust port in the engine or just the muffler?

To remove the cable out of the bracket you don't bend the plastic tabs out you squeeze the tabs in and pull the cable out of the bracket.

FR FS AND FX engines are all the same basic engines. Air filters are different Carbs are different between HPs. Seems to be a reliable...

Do what the manufacturer recommends. Do not overthink it.

I have found in my experience Parker wheel motors to be top of the line.

Hello chuckpen, Being that some "landscaper" DIY has been trying to "work" on it. Be careful to check the oil in the system. Too many...

Most electric pto clutches has a brake that is supposed to stop the blades from turning after it is disengaged quickly instead of...

If it is leaking at the head, it is usually the valve cover gasket.

Hope that works for glad to help

Have replaced the aluminum with steel a lot of times with no problems.

The steel one will work just fine. Not sure why they use aluminum.