hlw49's latest activity

FYI, the crankshaft length is the distance from the underside of the mounting flange of the engine, not just the part exposed beyond the...

Neither does Kohler. However, many mower manufacturers say to change the oil early in their operators manuals. It's best to follow the...

Where I use to work did a PDI on every mower that went out the door. We had very few come backs.

Kawasaki does not specify a 5-hour oil change any more.

Checking the engine charging voltage also check clutch air gaps. 3. With feeler gauge check gap at all three locations (minimum of...

You have to understand how to operate the Snapper RER. You always start out in 1st speed you then shift to higher speeds without...

why does Briggs use aluminum push rods? Do you know of any other manufacturer that uses them?

The s as far as I know mean it is a single part and nothing to do with the quality of the filter.

Kohler has a 300, hour extended life 10W-50 synthetic oil.

https://vogelmanufacturing.com/flywheel-starter-ring-gear-new-command-v-twin.html

No, it would have to have a hole in the fuel line or a bad check valve in the carburetor. If it runs after you put the fuel in the...

Intake .003 - .005 Exhaust .005 - .007 Always set closer to the tighter clearance on OHV engines.

here is a frame repair kit for the Husqvarna lawn tractors https://www.ebay.com/itm/204770027301

Did you mount the coil correctly?

model type and code no.