hlw49's latest activity

milky looking oil means it had water in the hydro.

yes sea foam is some good stuff

Watch the video. Engine has to be on top dead center on the compression stroke to adjust the valves.

Bottom valve is intake top is exhaust. Clearance is .003 to .005 on intake and .005 to .007 exhaust.

What model mower is it and model type and code of engine.

A Kawasaki is a better bet.

Normal. When running there's a fine mist of oil blowing around the crankcase, and then the ever changing pressure and area of the...

can you find the model no. and post it so someone here might be able to recognize...

can you find the model no. and post it so someone here might be able to recognize it and match something up.

Well you must use a multi meter and actually the safety switches. But I suspect the ECU has a failure as they are know to have failures...

https://kawasakipower.com/kengine/3-TechService/Home/Serviceman/99924-2093-09-FR_FS_FX651V_691V_730V_English_eBook.pdf follow...

Remove the spark plug and turn the engine over slowly by hand and see if that piston is going up and down. Remove the valve covers and...