Recent content by Hayterman

Not yet, it's been raining here all day so maybe tomorrow. I'll let you know asap.

https://www.dropbox.com/s/7n44rp39lxszm2c/IMG_9819%202.jpeg?dl=0 Thanks Try this one

I have a photo of the plug after running for a few mins but it's too large to attach it says. Do you have what's app at all? Anyway it's black around the outside and darkish brown around the insulator and very slightly lighter in the centre.

Hi Well now, I followed your advice to the letter and hey after 1st flooding the plug it then started and ran on and on BUT there just had to be a but, it sounds like every 3rd beat it misses and then acasionaly blows back but carries on running and starting straight away. I do have a vid of...

Will do. I'll report back tomorrow. Fingers crossed

Hi Rivets, The new carb turned out to be the wrong one. You are right that 640262A is the correct one, and that is the one that equates to carb number 505 as stamped on my original carb. I used an Intagarden kit which was the only one I could find that was in the UK and not the USA. Which came...

Update: Well re-built carb with new seat and needle, new O rings etc. Engine now will only run with easy start sprayed into air intake, same as with the New carb I bought! Basically it only runs with the worn out punctured float and old needle and seat. Now completely at a loss.