Hammermechanicman's latest activity

Look at this wiring diagram from an onan engine. What happens when you disconnect a plug wire to try and run on one cylinder?

Does the red light on the side of the right side control station when you turn the key on? There is a bulletin about replacing the...

Have you done a compression or leakdown test on the engine? Disconnect one plug and start the engine. How does it run? Reconnect the...

Stihl recommends because it needs it or is that just corporate covering their *** documentation??? I have worked on hundreds of saws...

I have 5 chainsaws. 2 of which are running high compression and advanced timing. If you try to start them without using the compression...

I have a list of things the shop or rather clown with tools did. Wrong plugs, missing screws, broken choke, loose oil filter, didn't...

These are the plugs i took out of a KT745 Also the shop couldn't diagnose broken choke hardware causing poor running.

Is the belt actually shredded? If so it is rubbing something it shouldn't. Is it melting and smell burnt rubber? If so idleror spindle...

Here is an example of aftermarket using the wrong measurement. The stens belt is 107" and should be B110. The belt pic is the one that...

E-0 yes if you can find it but why 91 octane?