Recent content by gtr1999

  1. G

    1996 B&S 15.5HP engine issue

    Thanks for the info. The last head gasket I used was the foil gasket and it was still good when I pulled the head. Are they still available? A side note I was going to lap the valves but my handle is 25 years old and the suction cups lost the grip. I went to 3 parts stores to buy one and they...
  2. G

    1996 B&S 15.5HP engine issue

    Thank you Doc. Makes perfect sense on the shim and I can see it did have a little wear on it. McMaster Carr may have one similar. I did see that repair on YT by Teryl and have seen a lot of his videos over the years. It seems as if others have also copied his idea as they are using the same...
  3. G

    1996 B&S 15.5HP engine issue

    Now that is interesting. The broken one doesn't look like it separated from the oil seal but I don't have a new one here to compare. It would make sense since it doesn't show up in the parts diagram. Thank you. I know it makes sense to toss the old tractor and go to a newer one but I am the type...
  4. G

    1996 B&S 15.5HP engine issue

    No, there was a positive seal on the valve guide, the one I am talking about was under the spring and steel seat, against the head. It is 021-022" thick, 1.155" OD and .465 ID, measurements are not exact since it broke into 3 pieces.
  5. G

    1996 B&S 15.5HP engine issue

    Thank you, I will check into this engine and check with a guy I used to work with who had a small home business, maybe he has some parts. Any item on the plastic shim under the intake that broke apart? That is not showing on the exploded views I pull up online but I doubt it was ever replaced...
  6. G

    1996 B&S 15.5HP engine issue

    Yes I agree the guides moved. I actually reached out to B&S to see what the replacement engine is for this one and was told they didn't have one. I would expact there is a replacement but I don't have the cross reference. If it has the same crankshaft, bolt pattern, the rest would be part of the...
  7. G

    1996 B&S 15.5HP engine issue

    Yes I would blow off the mower after use. There was some grass down on the left side of the cylinder but overall it was not packed.
  8. G

    1996 B&S 15.5HP engine issue

    I was cleaning up the head today and found the exhaust guide is pushed up. It clearly is higher than then the intake and I am assuming this is a common thing. Checking on the repair of tapping a side hole and spotting the guide is something I can certainly do. Does anyone one know what the...
  9. G

    1996 B&S 15.5HP engine issue

    Thank you That’s what I planned on doing and just moved the tractor to the back of my shop until I get the new parts. I’ll post a follow up once I get it all sorted
  10. G

    1996 B&S 15.5HP engine issue

    Hi, I am a new member here and have a Craftsman 42" tractor with the original B&S 15.5 hp engine. Model #28N707-0173-01 Code # 95121348 I have kept this old machine running since new. We bought it for a small business and once they stopped doing lawn maintenance, I bought the tractor to use at...
  11. G

    New member

    Thank you. I plan on working on it today and will post my findings.
  12. G

    New member

    Hi, I am a new member here, just getting into a 30 year old Briggs 15.5hp on a Craftsman lawn tractor.
Back
Top