Recent content by gregjo1948

Thank you--how can I tell if it's a TG Torq motor?

I'm usually quite patient and can take criticism but when someone insults me and calls me an idiot, I draw the line. I agree with you about the internet being a great tool and I enjoy the forums found on here. I won't say anything on a forum that I wouldn't say to someone's face, and I wouldn't...

The Orings are probably around 4"

I want a seal/O-ring kit. There is a seal and several O-rings in these motors. The outer seal on the axle wasn't leaking, but I'll replace it while I'm in there.

Just for your info--I sent Parker all the numbers off the tag on the Parker wheel motor and the number that was stamped into the housing. This isn't my first time looking for parts. I didn't ask for the part number for the kit. I just ask where I could get a seal kit. It shouldn't matter what...

Hope I don't need to make them as, there are about 6 of them.

I already have the motor out and have numbers off it. It has an oil seal over the axle and several O-rings within the sections of the motor. I'm trying to find the seal and the O-rings. Quite sure I could get the seal separately but, I need the O-rings and probably they all come as a kit.

My Ferris 3100Z is leaking oil from the left wheel motor. The motor is a Parker and has two long numbers on the tag. I've looked for a seal/o-ring kit for it but can't find one. Anybody know where to find a kit for it? Thanks, gregjo1948

Keep in mind that hydro fluid is hotter than engine oil.