Gord Baker's latest activity
-
GGord Baker replied to the thread Knock-off oil filters.I was told 3 companies make all the Oil Filters, just paint them differently.
-
GGord Baker reacted to Freddie21's post in the thread Briggs Intek, replaced everything, still surging.. Ideas? with
Like.
I have induced surging, many times, by using an Amazon type carb. Clean and rebuild the OEM carb. -
GGord Baker replied to the thread Briggs Intek, replaced everything, still surging.. Ideas?.Your description indicates that it is running in a lean condition. Try giving it a small bit of Choke. If that cures it, then you need...
-
GGord Baker replied to the thread Briggs Intek, replaced everything, still surging.. Ideas?.
-
GThe bath tub is the way to go. Fill the tub with enough water to completely immerse the tire and rim. Check the treads very carefully...
-
GGord Baker replied to the thread Can't Find Tire Leak.IMHO, far too much force on the arbour. Use a big vise with 5/8" rod vertical.
-
GGord Baker replied to the thread Can't Find Tire Leak.
-
GGord Baker reacted to kbowley's post in the thread Toro model 20331 6.75 Briggs no choke/no prime cold start issue with Like.
Remove the air cleaner and housing from the engine. Please remove the spring connecting the engine to the plastic choke shaft and store...
-
GGord Baker reacted to Elkins45's post in the thread I played an unfortunate April Fool’s joke on my Briggs V-Twin. with Like.
It started right up and the ammeter indicates it's charging. I guess the Lord really does look out for fools.
-
GOne of the deck pulleys is getting hot and the bearing is seizing.
-
GHi all. My John Deere E130 is burning the deck belt up. I took the deck off and all 4 pulleys are smooth rolling without any noise. When...
-
GGord Baker replied to the thread Not to be operated by f**kwits.Never lend your tools, vehicles or wife. That must have been some rain!
-
GJust turn them over , it will be OK
-
GJust a do-it-yourselfer, years ago I rebuilt a 4HP Kohler on my wood splitter, same problem, cause: put the compression ring on backwards.
-
GGord Baker replied to the thread Exmark 22.5hp blowing white.Well done sir.