Gord Baker's latest activity

I have had a lot of luck using JB Weld and a couple pop rivets, or small bolts. If you using brake your own pads, make sure you counter...

Shops have NOT relined Brake shoes or Clutch discs in over 60 years!. Buy some rivets from perhaps a shoe repair place or just use...

Glad you got it to rotate. Keep an eye on the oil level after you run it.

Since you don't know enough about Diesel or other engines (they don't have a Carb) best to buy one if you must have a Diesel or use what...

High tension lead from coil is likely faulty. Replace coil and wire. You should check compression first.

Thanks, that would be over $60 Canadian!

Please send me one for a JD X320. Thank You.

12+ volts at the battery doesn't mean anything. Need to have it actually load tested. You can have 12 volts at rest and drop to 0...

Just for fun. Take spark plug out and see if gas shoots out of spark plug hole when you turn it over.

If you have removed and cleaned the Negative cable where it attaches to the Frame and the other Battery cable ends, try to find a multi...

I just looked at an IPL for a version of your snowblower. Keeping in mind that the PR241 model is like saying it’s a Ford Mustang when...

One more thing…sometimes the carb gets so cruddy at the inlet that the float needle sticks and gas cannot enter the bowl. If you...

Please STUDY the Manual if you have one. Drain the Float bowl if you are able carefully replace it marking the Orientation if you do...

Let it come to an idle for a minute or so before shutting down.

I think you should leave the Engine alone.