Recent content by Generac and Stratton

Bearing never arrived and message left at seller's business was not returned despite the money being paid. Got very lucky though and noticed a bushing at local Tractor Supply store which fit the shaft. Was around 0.252 mm too small to fit the tube on the case snugly, so cut a band out of a soda...

Found a free sharing site that seems to work. Dirt near rear of house with water was currently being filled (all the fresh tilled was about 12" of build up being pulled back to fill water which is 100% clay at the base) and large square that was tilled down was done before I noticed the shaft...

Know what the size cap per picture is? I turned resolution down to 1.5mb size range and still too big. Yeah it's a tough little tiller minus the stress cracks that need attention. I removed the adjustable drag bar off the rear and just let it do what it wants then walk forward. When it digs...

OK, figured out what it is. 21031-9 made in 1989 (must have had it's roots in the late 70's given it's appearance). Dunno why, but was finally able to read the tags which had no ink showing before. All the clay mud caked on there must have reactivated the ink LOL. Upon closer inspection in the...

Just got lucky and found something that virtually identical: tiller: https://parts.shankslawn.com/oemparts/a/mtd/5b776a6487a866161446e0db/chain-case-assembly Chain case: https://www.partstree.com/models/210-020-205-mtd-tiller-1990-mid-states-distributor/parts-1/ Guessing I need #24 and the #26...

Hello. Bought one of these locally and despite being from, I'm guessing the mid 1970's, it's super tough and breaks up 8" chunks of clay and whatever else I throw at it. A 2' pile of chunks of clay/soil and it just rips. Anyhow, started popping the belt and noticed the shaft the V pulley is...