GearHead36's latest activity

4.10/3.50x5 is approximately 11 inch in diameter. So maybe narrower than the spec'ed tire but same height.

Hmmm. Looks like tire size is not the reason I can't get my deck level. I don't think I can justify replacing the tires just to...

Here is a photo of the ID sticker. I guess that COULD be 968 99 92 20.

This is the Husqvarna forum, so... yeah. Those specs don't match my machine. They must have made a change at some point. Mine has a...

Thanks, ILENGINE. The rears are right, but I'm not sure about the fronts. They are currently Kenda Corsas, and size printed on the...

I have a CZ 4817, and the tires are fairly old and leaky. I just deal with it by putting air in them every time I use it. I recently...

Sounds like the governor spring is either wrong, or installed wrong. 4800 should be out of the range of adjustment. I'd look over the...

Do both mowers run the same RPMs? Are both air filters clean? Or, the same amount of dirty? Same blades? High lift blades will use more...

To those saying that you don't need to be in the seat for starting.... Some do, some don't. I have two riding mowers. A Husqvarna CZ4817...

I can't keep the angle consistent enough with a flap wheel. I really like the idea of soaking blades in water for ez clean up. Why...

I just put my blades in vise, and use 60 grit flapwheel on drill...then cone balance First I soak them in pan of water for ez clean...

You might try one of these. I just ordered one, so I can't comment yet on how well it works. It's a much cheaper knockoff of a tool that...

Beware the grass clippings They can be very dangerous...