GearHead36's latest activity
-
GGearHead36 replied to the thread Cub Cadet spindle parts maintenance/replacement."Do the cones & cups need to be replaced as sets?" Never mind. I did a bit of research, and found that they get replaced together. I...
-
GGearHead36 reacted to Auto Doc's's post in the thread Cub Cadet spindle parts maintenance/replacement with
Like.
Here is an Ebay source... -
GGearHead36 replied to the thread Cub Cadet spindle parts maintenance/replacement.Model # is 53RWEFJA050, DOM - 02/2016. Does that change anything? I speculated, "Is it possible that the 741-04129 bearing is not...
-
GGearHead36 reacted to StarTech's post in the thread Cub Cadet spindle parts maintenance/replacement with Like.
To be 100% sure need the model number from serial number tag but the following is for middle of pack model. Bearing should be LM11949...
-
GGearHead36 reacted to slomo's post in the thread Cub Cadet spindle parts maintenance/replacement with Like.
Some people take a small dope needle and inject grease into the black rubber seal. That fills the bearing with grease. Then a small...
-
GGearHead36 replied to the thread Cub Cadet spindle parts maintenance/replacement.Is it possible that the 741-04129 bearing is not right for this spindle? When I search on 741-04129, I get hits for spindle rebuild...
-
GGearHead36 replied to the thread Cub Cadet spindle parts maintenance/replacement.Maybe, but all the fasteners not on the engine are SAE. Everything on the Kohler engine is metric. I measured the ID of the bearing. I...
-
GGearHead36 replied to the thread Cub Cadet spindle parts maintenance/replacement.The spindles have zerks. On the two good spindles, I filled them with grease, and them pumped a couple of more times, which resulted in...
-
-
GRecently, I decided to do some deck maintenance on my Cub Cadet Pro Z 100. Two of the spindles (p/n 918-07255) seemed pretty solid. No...
-
