Forest#2's latest activity

I added a snow king flywheel with teeth and an electric starter to make mine easier to start. Cost $100. I've done the same. Lot...

I just got through red koting some of those tanks. Really surprised at how well they cleaned up inside. I strapped them to a tractor...

I constantly tell people to "GOOGLE IT" google is your friend.

Here is a Tecumseh carb repair link. https://outdoorpowerinfo.com/repairs/ I've found clone carbs for the HM100 but they are the...

Hello T., The HM100 is a 10HP rated engine, but an 8HP would still do the job on a log splitter. These were heavy cast iron blocks and...

Super Tech and Rotella are available at the local wally world in my area for $18 gallon in 30W and they sell fast. I cannot make a trip...

Hello S., Synthetic is an improvement because it reduces both fluid friction and heat that are associated with conventional oils. As...

Your does not. If the pump diaphragm is on the side of the pulsa jet carb it does not have the check ball tube. The flappers on the...

Thanks for the comeback.

The reason I ask you to test with the tank completely full is: This bypass's the long pick-up tube and the pump for such which is used...

I only remove welch plugs when all other cleaning methods fail. If I have a replacement Welch plug I carefully drill a hole in the...

????????? explain. Pickup tube holes?????

Probably trying to use a smart phone. People sometimes needs a real desktop computer with a large screen. Rust is not your friend; it...

Did you fill the gas tank completely full and test? Here is a carb repair link https://outdoorpowerinfo.com/repairs/

https://en.wikipedia.org/wiki/Dead_man%27s_switch