Forest#2's latest activity

Chain link fence piping is usually thin wall construction and galvanized, any kind of welding will be a challenge.

I do check mine with a digital torque adapter. That how found out how lousy HFT torque wrenches were. One was nearly double the torque...

Lubing the bolt will cause u to overtorque them.

You are most likely SOL finding a 1 1/8 dia stack pulley. Most generally when someone needs such they have replaced a 1 inch shaft...

Pulley groove wear gauges

Something to add to the list like cub cadet troy bilt and husqvarna

Solenoid shift starter should keep the Bendix up; unless, the battery voltage is dropping below 9.5v. If the applied voltage is dropping...

If that is the case then the OP has a problem as I haven't seen a double stack pulley that is 1-1/8 ID. And I just had a problem with CC...

I don't recall B&S making an 11HP twin cylinder engine. I'm still wondering how a "16HP carburetor" was mounted to this. The original...

I suspect head gasket let go but ???????????? A engine model number, type and code would be helpful. (or even some pictures of the...

Head gasket blown

Post the model number of the tractor machine and the engine model?

What ILengine is saying in post 9 is : It appears that the B+ post on the regulator terminal does not have a complete circuit to the B+...