Forest#2's latest activity

You asked: Who's Murphy? search: Murphy"s Law on-line

It happens. Murphy has woke up. You say grass is brown and dirty in your area. Must not be close to Oklahoma. If the grass is brown...

So your carb has the jet adjust on the front of the carb? If so that screw is for slow idle smooth engine idle adjust. I've seen some...

Hi Tommy, Without the compression release operating properly the engine compression is too high for the starter to effectively crank...

No I actually have another machine it's a Yard machine is the hydrostatic transmission but there's no reason why this one the celty 2000...

Just something to think about: (food for thought $ wise also_ 15 year old mower and still has same belts, pulleys, deck spindles, etc...

Good Luck to Ya. Not a fun project. Stay Safe when under the rig.

I suspected such. Your low idle issue right now is with the mechanical linkages and not the engines governor. First: You are going to...

As the clutch is depressed towards the front the drive belt slacks. As the clutch comes back the motion drive belt tension increases...

See pg 24 of your owners manual. Here is a link to download a owners manual for that rig. https://c.searspartsdirect.com/doc/L0912322...

If you can control the speed by moving the carb lever to touch the idle speed screw, you don't have a carb problem. When starting and...

You mentioned changing the carb. Not likely the carb with the symptoms you said. Them Briggs twins only used two types of carbs a 3...

Couple questions: Can you hold the carb linkage at idle and get a slow idle? (I'm talking about holding the carb shaft against the idle...

You are in the early stages of a blown head gasket. Blown head gasket between the cylinder wall and the push rod cavity is the second...

OLD thread!!!!!!!!!!!!!